| T O P I C R E V I E W |
| rbrduck71 |
Posted - 11/26/2008 : 7:14:09 PM
brand new 10-20hrs. on them changed guide seals twice, the last time used darts favorite set right before NOV. race in avenal 2008, motor set for a couple days and pulled it apart to find out why i still have oil getting in the combustion chamber. set the heads on the bench and look down intake runner, on top of all the intake valves is a small puddle of oil. dart says intake rocker stud goes into intake runner, i looked and didnt see that, vaccum tested stud hole had no loss of vaccum. no milling has been done, never overheated. while i have the motor (SBC) apart im getting rid of the high volumne oil pump, because it is only a 7000rpm motor, 11.6 to 1 compression and COMP CAMS biggest torque cam for four wheel drives part# 12-243-3, not a wild motor. HHHHEEEELLLLLLPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! THE LOST DUCK P.S.THANKS |
| 15 L A T E S T R E P L I E S (Newest First) |
| oldiron |
Posted - 11/08/2009 : 07:43:40 AM
Well now thar Duckie Boy, that ain't no ways ta talk to a olde guy! R ya saying I'm cheap or the talk is cheap. I'll run no race before it's 100degrees.
Not the fastest, just alot faster than the Duck now |
| rbrduck71 |
Posted - 10/13/2009 : 11:55:31 AM
TALK IS CHEAP OLD GUY
http://www.avenalsanddrags.com/images/05790007.jpg
not yelling just typing |
| oldiron |
Posted - 09/09/2009 : 10:10:35 AM
Well there ya go! Just when I tink I can trash talk ya,youse just go an show up. Would that bee a duck blind? Boat time ya showed ya-self Duckie Boy!!!
Not the fastest, just alot faster than the Duck now |
| rbrduck71 |
Posted - 09/06/2009 : 6:20:44 PM
OOOH THE LOVE I FEEL
http://www.avenalsanddrags.com/images/05790007.jpg
not yelling just typing |
| oldiron |
Posted - 08/25/2009 : 1:51:57 PM
To all of ya that wish to talk to the Duck boat them Dart heads. The Duck's puter is down. I sounds like it threw a rod, or it sounds like a rock crusher that's pissed. He will not be racing this Sept race in Avenal, so we will not be selling any Duck hunting passes. Hope ta see ya there Heavy Metal. Race on Swag!
Not the fastest, just faster than the Duck |
| Paul Graham |
Posted - 08/24/2009 : 12:13:42 PM
quote:
Originally posted by oldiron
Lots an lots of JBWeld some zip ties Duct tape an sell your heads. I have some spare heads you can borrow. But then they are for race engines only. They may not fit your go-kart motor. Go Duck Go!!
Not the fastest, just faster than the Duck
have you checked your rocker arm geometry? also check intack manifold for crack or casting flaw. good luck. |
| Paul Graham |
Posted - 08/24/2009 : 12:01:20 PM
quote:
Originally posted by rbrduck71
STILL LOST!!!!
http://www.avenalsanddrags.com/images/05790007.jpg
|
| oldiron |
Posted - 05/18/2009 : 9:20:51 PM
Hay thar Duckie Boy! It war goode ta sea ya at the races in Avenal? How dit your go-kart do? Met a feller thar that goes by Heavy Metal. Nice feller,that guy is. Knot sure why he was a wantn ta find us. I was a scart ta let him know who we was! Did ya ever git that Toyota axle ta fit your 9" like I showed ya?
Not the fastest, just faster than the Duck |
| rbrduck71 |
Posted - 05/07/2009 : 12:46:16 PM
yeah the car is ready, got stock heads on it now, my ignorance screwed up my guides on the dart heads, the problem me and everyone else has is can we afford to go, i will be there car or not
CANT FREAKIN WAIT!!!!
http://www.avenalsanddrags.com/images/05790007.jpg
not yelling just typing |
| mikey banducci |
Posted - 05/06/2009 : 1:04:39 PM
will you have the car ready in time duck?
Im trying to go fast, honest.
http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=295747074&albumID=336971&imageID=5885566 |
| rbrduck71 |
Posted - 05/05/2009 : 10:51:47 AM
problem solved
i just put the rim in a press and bent it enough to counter act with the bend in my axle
thanks for asking
http://www.avenalsanddrags.com/images/05790007.jpg
not yelling just typing |
| oldiron |
Posted - 04/29/2009 : 07:34:41 AM
Hey there Duckie boy! Well did ya try the stop leak? You might try some of that thar engine restorer. It rebuilds your engine when you drive it. Purty neat stuff. Did ya ever find that axle you weare lookn fur? How did ya bend your axle? Drivers side or passenger side?
Not the fastest, just faster than the Duck |
| rbrduck71 |
Posted - 04/16/2009 : 5:34:28 PM
WOW!!!!!!
http://www.avenalsanddrags.com/images/05790007.jpg
not yelling just typing |
| oldiron |
Posted - 04/16/2009 : 11:29:49 AM
Hey there Duckie Boy! Have you tryed putting some radiator stop leak in your oil. That would stop the leakeage onto your intake valves. It works for radiators, why not on dart heads. Bow ties don't have this problem.
Not the fastest, just faster than the Duck |
| mikey banducci |
Posted - 04/13/2009 : 12:56:19 PM
not this young kid, i go and do my homework before i do ANYTHING, and i do believe thats what you should have done. but go on, make up your own stuff, just leave all the young kids out of it....
Im trying to go fast, honest.
http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=295747074&albumID=336971&imageID=5885566 |
